Difference between revisions of "Swagbadge2021 Dagbadge"
(Created page with "= Dagbadge = It's a DIY Swagbadge! == Components == To build one of your own you will need to purchase: * ESP32 * Two 0.96" OLED displays * Two Switches...") |
|||
| Line 5: | Line 5: | ||
== Components == | == Components == | ||
| − | To build one of your own you will need | + | === Parts list === |
| − | * ESP32 | + | |
| − | * Two 0.96" OLED displays | + | To build one of your own you will need: |
| + | * ESP32 microprocessor - should be around $20 | ||
| + | * Two 0.96" OLED displays 128x64 - under $20 each | ||
* Two Switches (SMT buttons) | * Two Switches (SMT buttons) | ||
* Wires (male and female) | * Wires (male and female) | ||
* Breadboard | * Breadboard | ||
| + | * MicroUSB cable | ||
| + | |||
| + | === Where to buy? === | ||
| + | ESP32: | ||
| + | * It is possible to get an ESP32 with a single OLED preattached: [https://randomnerdtutorials.com/esp32-built-in-oled-ssd1306/ ESP32 Wemos Lolin32 OLED] or similar | ||
| + | * AU: [https://smalldevices.com.au/products/wemos-lolin-d32-pro SmallDevices Wemos Lolin32] | ||
| + | * AU: [https://www.tinypico.com TinyPICO] (by @unexpectedmaker in Melbourne) (good quality, reputable) has ESP32 boards but they don't come with an OLED attached. | ||
| + | * AU: [https://core-electronics.com.au/tinypico-47708.html Core Electronics TinyPICO] | ||
| + | * AU: [https://core-electronics.com.au/sparkfun-esp32-thing.html Core Electronics Sparkfun ESP32 Thing] | ||
| + | |||
| + | OLED: | ||
| + | * AU: [https://smalldevices.com.au/products/monochrome-1-3-128x64-oled-graphic-display?_pos=2&_sid=90f2e30cb&_ss=r SmallDevices OLED] | ||
| + | * AU: [https://au.element14.com/search/prl/results?st=esp32&sort=P_PRICE Element14 OLEDs] | ||
| + | * AU: [https://core-electronics.com.au/monochrome-0-96-128x64-i2c-spi-oled-display.html Core Electronics OLED] | ||
| + | |||
| + | Switches: | ||
| + | * AU: [https://smalldevices.com.au/products/momentary-tactile-push-button-switch-6x6x5mm?_pos=6&_sid=aa09c53c4&_ss=r SmallDevices Switch] | ||
| + | * AU: [https://core-electronics.com.au/mini-push-button-switch.html CoreElectronics switch] | ||
| + | |||
| + | Wires: | ||
| + | * Any electronics shop | ||
| − | + | Breadboard: | |
| − | * | + | * AU: [https://core-electronics.com.au/solderless-breadboard-300-tie-points-zy-60.html CoreElectronics Breadboard] |
| − | * [https://www. | + | * AU: [https://www.jaycar.com.au/arduino-compatible-breadboard-with-400-tie-points/p/PB8820 Jaycar Breadboard] |
| + | * AU: [https://smalldevices.com.au/products/half-sized-breadboard-400-tie-points-solderless-interlocking-and-self-adhesive?_pos=4&_sid=aa09c53c4&_ss=r SmallDevices breadboard] | ||
| + | == Assembly == | ||
== How to assemble == | == How to assemble == | ||
Revision as of 06:51, 6 December 2020
Contents
Dagbadge
It's a DIY Swagbadge!
Components
Parts list
To build one of your own you will need:
- ESP32 microprocessor - should be around $20
- Two 0.96" OLED displays 128x64 - under $20 each
- Two Switches (SMT buttons)
- Wires (male and female)
- Breadboard
- MicroUSB cable
Where to buy?
ESP32:
- It is possible to get an ESP32 with a single OLED preattached: ESP32 Wemos Lolin32 OLED or similar
- AU: SmallDevices Wemos Lolin32
- AU: TinyPICO (by @unexpectedmaker in Melbourne) (good quality, reputable) has ESP32 boards but they don't come with an OLED attached.
- AU: Core Electronics TinyPICO
- AU: Core Electronics Sparkfun ESP32 Thing
OLED:
- AU: SmallDevices OLED
- AU: Element14 OLEDs
- AU: Core Electronics OLED
Switches:
Wires:
- Any electronics shop
Breadboard:
Assembly
How to assemble
Software
Micropython
Aiko
Applications
Extend it with SAO
Your dagbadge doesn't have prebuilt SAO headers, but to make your own you need to...
Head to SAO addons!
