Difference between revisions of "LoliBot-Assembly"
(Start of page structure, mostly empty) |
(→Check Parts In Kit) |
||
| Line 16: | Line 16: | ||
[[File:LoliBot-1-parts.jpg]] | [[File:LoliBot-1-parts.jpg]] | ||
| + | |||
| + | Your kit will also include an extra cable tie and a 3-way 90-degree header, which aren't shown in the picture above. | ||
Please check over the items in your kit, and if you think you are missing something then let us know. | Please check over the items in your kit, and if you think you are missing something then let us know. | ||
Revision as of 05:58, 7 January 2018
Tools
Your own tools are not required for the Open Hardware Miniconf assembly session, but if you are able to bring any of the following then that would be great.
If you're flying, please bear in mind that sharp items like cutters or multimeter probes will need to be put into checked baggage not carry-on.
- Wire cutters (and wire strippers if you have them)
- Multimeter
- Soldering iron
- Solder
Check Parts In Kit
Your kit should contain the following items:
Your kit will also include an extra cable tie and a 3-way 90-degree header, which aren't shown in the picture above.
Please check over the items in your kit, and if you think you are missing something then let us know.
1: Install headers on Lolin32-Lite
aoeu
2: aoeu
aeua
