Difference between revisions of "IoTuz Dev Environment"
Stuart Young (talk | contribs) |
Stuart Young (talk | contribs) |
||
| Line 3: | Line 3: | ||
=Installing the Dev Framework= | =Installing the Dev Framework= | ||
| − | Instructions for installing the ESP-IDF dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf | + | Instructions for installing the '''ESP-IDF''' dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf |
Before the '''Open Hardware MiniConf''', it's recommended that you complete steps '''''1-3''''' of the specific setup guides for your OS. | Before the '''Open Hardware MiniConf''', it's recommended that you complete steps '''''1-3''''' of the specific setup guides for your OS. | ||
Revision as of 09:51, 9 January 2017
The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP_IDF dev environment/framework.
Installing the Dev Framework
Instructions for installing the ESP-IDF dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf
Before the Open Hardware MiniConf, it's recommended that you complete steps 1-3 of the specific setup guides for your OS.
USB Serial Drivers
The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx if required.
If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.
